School safety film.Protect your students from glass.
Anti-shatter school safety window film installed across UAE schools — holding broken glass fragments in place, deterring forced entry and meeting UAE lockdown protocol requirements. Madico SafetyShield: the most specified school safety film in the UAE.
🏭 Book your free school survey
Free site assessment · no obligation · full compliance documentation provided
ISO 16933 Certified · Madico Premier Partner UAE · 10-Year Warranty
Three glass risks every UAE school faces — and one solution.
Standard glass in UAE school classrooms and corridors poses three serious risks to students and staff. School safety window film addresses all three with a single, cost-effective installation.
Blast Events
Dubai sandstorms generate high-velocity debris that strikes glass. School safety film holds glass intact during impact events — protecting students and staff from sudden glass failure across classroom windows and facades.
Accidental Glass Injuries
Students collide with glass doors and partitions. Without safety film, standard glass shatters into sharp, high-velocity fragments that cause serious lacerations. School safety film holds glass together on impact — no dangerous shards.
Forced Entry Through Glass
Glass doors and classroom windows are the most vulnerable point in any school perimeter. Anti-shatter school safety film turns a 3-second breach into a sustained multi-minute attempt — critical time for lockdown protocols to activate.
Anti-shatter film that keeps classroom glass intact on impact.
School safety window film is a thick polyester film applied to the interior surface of classroom and corridor glass. On impact — whether from an accident, intruder or storm — the film holds all broken glass fragments in place, preventing dangerous shards from injuring students and staff.
Madico SafetyShield is the most specified school safety film in the UAE — independently rated to ANSI Z97.1 (safety glazing) and EN 12600 (impact resistance). It is optically clear and virtually invisible once installed: no change to classroom lighting, no dark tint, no disruption to the learning environment.
- Holds broken glass in place — no dangerous shards toward students
- Dramatically increases forced-entry resistance on classroom doors
- Supports UAE school lockdown and emergency protocols
- Optically clear — no change to classroom appearance or light
- Compatible with all interior glass in UAE school buildings
- 10-year manufacturer warranty — registered with Madico
Independently tested. Certified across every major standard.
Madico SafetyShield 700, 800 and 1500 are independently laboratory-tested across impact safety, anti-intrusion, wind-borne debris, bomb blast and GSA blast standards. Full test certificates available for school compliance files and tender submissions.
| Product | ||||
|---|---|---|---|---|
| Test | SafetyShield 700 | SafetyShield 800 | SafetyShield 1500 | |
| Impact – Safety Glazing | ANSI Z97.1Unlimited | Pass | Pass | Pass |
| CPSC Part 1201.4Cat I | Pass | Pass | Pass | |
| CPSC Part 1201.4Cat II | Pass | Pass | Pass | |
| EN 126001A | Pass | Pass | — | |
| Anti-Intrusion | Security glazingDIN 52290 – A1 | — | — | Pass |
| Security glazingEN 356 – P2A | — | — | Pass | |
| Burglary Resisting GlazingUL 972 | — | — | Pass | |
| Burglary Resisting GlazingULC S332 | — | — | Pass | |
| Wind-borne Debris | Large Missile ImpactASTM E-1886/E-1996 Level B – 4½ lb 2x4 | — | Pass | — |
| Large Missile ImpactASTM E-1886/E-1996 Level D – 9 lb 2x4 | — | — | Pass | |
| Pressure CyclingASTM E-1886/E-1996 ±50 psf | — | Pass | — | |
| Pressure CyclingASTM E-1886/E-1996 ±100 psf | — | — | Pass | |
| Air LeakageASTM E-283 1.6 PSF (25mph) | — | — | Pass | |
| Structural PerformanceASTM E-330 | — | Pass | Pass | |
| Water PenetrationASTM E-547 | — | — | Pass | |
| WeatheringASTM G-26 | Pass | Pass | — | |
| Bomb Blast | EN 13123-2, EN 13124-2EXR1 | — | Pass ⑦ | — |
| ISO 16933EXV19(E) (Low Hazard) | — | — | Pass ⑧ | |
| ISO 16933EXV25(C) (Minimal Hazard) | — | Pass ⑦ | — | |
| ISO 16933EXV33(B) (No Hazard) | — | Pass ④⑦ | — | |
| ISO 16933EXV45(B) (No Hazard) | — | Pass ④ | — | |
| ISO 16933EXV45(E) (Low Hazard) | — | Pass ① | — | |
| ISO 16933SB3(B) (No Hazard) | — | Pass ⑦ | — | |
| ISO 16933SB4(B) (No Hazard) | — | — | Pass ⑧ | |
| ISO 16933SB5(E) (Low Hazard) | — | — | Pass ⑧ | |
| GSA (4psi, 28psi-msec)Level 2 | Pass ⑦ 37psi, 30psi-msec | Pass ⑤⑦ | — | |
| GSA (4psi, 28psi-msec)Level 3A | Pass ⑦ | Pass ②④ | Pass ⑦ 12.78 PSI, 78.79 PSI-msec | |
| GSA (4psi, 28psi-msec)Level 3B | Pass ①⑤ | Pass ① | Pass ⑦ 9.0 PSI, 72.8 PSI-msec | |
◼ Red highlighted rows = Bomb Blast section (ISO 16933 & GSA) Source: Madico SafetyShield Matrix · Full data sheets available on request
Full independent test certificates available for school compliance files, tender submissions and facilities audit documentation. Request certificates →
Every glass surface in a UAE school campus — covered
School safety window film is installed on every glass surface that poses a risk to students, staff or campus security — from individual classroom windows to full perimeter glass.
Classroom Windows
SafetyShield 800 on all classroom windows — protecting students from accidental glass injuries and holding glass intact during impact or storm events.
Main Entrance & Reception
SafetyShield 1500 or Safety Shield system on main entrance glazing — maximum forced-entry resistance for the most vulnerable access point on any school campus.
Corridors & Walkways
Anti-shatter safety film on corridor glass panels and partitions — preventing glass injury during everyday student movement and protecting high-traffic zones.
Sports Halls & Gymnasiums
Safety film on gymnasium glass walls and sports hall windows — protecting students from accidental ball impacts and physical contact with glazed surfaces.
Administrative Offices
Glass office partitions and admin area windows treated with safety film — protecting staff and providing an additional layer of security in school administrative areas.
Science Labs & Workshops
Safety window film on science laboratory and workshop glazing — critical protection in areas where accidental breakage, chemical incidents or equipment impacts are a higher risk.
Minimal disruption. Full documentation. Manufacturer warranty.
Safety Gard understands the operational demands of a school environment. All installations are planned around your term schedule, conducted by our in-house certified team and fully documented for your compliance records.
- Free site survey — we assess every glass surface and specify the right film grade
- Installation scheduled around school terms and holidays
- In-house certified team — no subcontractors, DBS-checked where required
- Minimal disruption — classrooms can be occupied the same day
- Full documentation package: specification, test certificates, warranty registration
- Madico manufacturer warranty registered for your compliance records
From survey to warranty — four simple steps
Free Site Survey
We visit your school, assess every glass surface and identify which SafetyShield grade is needed for each zone.
Specification & Quote
You receive a full written specification, product data sheets and transparent fixed pricing — no hidden costs.
Certified Installation
Our in-house team installs SafetyShield film at a time that suits your school schedule — including holiday periods.
Warranty & Documentation
Full compliance documentation and Madico warranty registration delivered — ready for your school compliance files.
School safety film standards — independently tested & certified.
Every Madico SafetyShield film is independently tested — not self-certified. Full test certificates available for school compliance files and tender documentation.
School safety film reviews from UAE principals & facilities managers
“After a glass panel broke near our reception, we had Safety Gard install Madico SafetyShield 800 across every classroom and corridor window — 42 classrooms in total. The documentation provided was exactly what our compliance team needed. Parents now have real peace of mind.”
“Safety Gard installed school safety film across our entire campus during the summer break. The team was professional, punctual and caused zero disruption. The warranty documentation was fully compliant with our facilities audit requirements.”
“Our school safety audit identified classroom glazing as a risk. Safety Gard surveyed the campus, specified SafetyShield 800 for classrooms and SafetyShield 1500 for main entrance glazing, and completed the installation in three days. Excellent specification knowledge.”
School safety window film FAQ — UAE
Everything UAE school principals and facilities managers ask us before booking a survey.
School safety window film is a thick anti-shatter polyester film applied to classroom and corridor glass. On impact — from an accident, intruder attempt or storm — the film holds all broken glass fragments together, preventing dangerous shards from flying toward students and staff. Madico SafetyShield is independently rated to ANSI Z97.1 (safety glazing) and EN 12600 (impact resistance) — the standards referenced in UAE school safety requirements. Safety Gard is the authorized Madico Premier Partner installer across UAE schools.
Yes. Anti-shatter school safety film significantly increases the time and effort needed to breach classroom and entrance glass — turning a seconds-long breach into a multi-minute sustained effort. This is critical for school lockdown protocols, giving staff and students time to respond. Madico SafetyShield 800 and 1500 are independently rated to ISO 16933 bomb blast standards (No Hazard and Low Hazard classifications) and GSA blast levels 3A and 3B — the same standards used for embassy and government glazing specifications.
Safety Gard recommends SafetyShield 800 (200 microns, ASTM E1886) for standard classroom, corridor and general school glazing. For main entrance glazing, reception areas and high-security access points, SafetyShield 1500 (375 microns, GSA Level C blast-rated) or the Safety Shield frame-bonded system is recommended. We will survey your campus and specify the right grade for each glass surface — free of charge.
No. Safety Gard always plans school safety film installations around your term schedule — ideally during school holidays or weekend periods. Classrooms can be re-occupied the same day as installation. Our in-house certified team works efficiently and leaves no mess. Most UAE school campuses are completed within 2–5 days depending on size.
Every school safety film installation by Safety Gard includes: a full written specification document, Madico product data sheets, independent laboratory test certificates (ANSI Z97.1, EN 12600, ISO 16933, GSA blast), Madico manufacturer warranty registration, and full installation records. All documentation is suitable for school compliance files, tender submissions and facilities audit requirements.
Madico SafetyShield school safety film carries a manufacturer warranty of up to 10 years and is engineered for UAE’s extreme UV and heat conditions. Safety Gard registers every school installation directly with Madico — ensuring warranty traceability and full documentation. Inferior, non-certified safety films typically degrade within 2–3 years under Dubai’s conditions. Always specify a Madico-authorized installer for school safety film in the UAE.
Book a free school safety film survey today.
Our Madico-certified specialists will visit your school, assess every glass surface and provide a full specification with transparent pricing — at no cost, no obligation.
Surveys arranged outside school hours. Full compliance documentation provided.
